What is Electrochemical Oxidation for Defouling?
What is Electrochemical Oxidation for Defouling? Electrochemical oxidation defouling includes the production of chemicals (oxidants) at the electrode surface, such as hydrogen peroxide at the cathode, which is an effective biocide and reactive oxygen species at the anode (O2, O2-, O3, OH radicals). Defouling of inorganic scaling can be achieved when the potential is applied without pressure to increase cross flow velocity and shear removal efficiency of scaling. The majority of electrochemical defouling methods using intermediates
Why Electro Chlorination is the Preferred Method for Power Plant Biofouling Control?
Why Electro Chlorination is the Preferred Method for Power Plant Biofouling Control? Many power plants are built near coastal areas since they can use seawater as a coolant. However, these plants frequently encounter the problem of biofouling or biofilm formation in their inlet pipes and cooling systems. Biofouling is defined as the attachment of micro-/macroorganisms to the inner surface of pipes and the subsequent growth of the organisms. It is caused by a variety of organisms ranging from microorganisms (bacteria, algae) to macr
How Dimensionally Stable Anode(DSA) is Used in Hydrogen Production?
How Dimensionally Stable Anode(DSA) is Used in Hydrogen Production? Carbon emission from carbon-based fuels causes environmental problems, while hydrogen is regarded as a new energy source to replace fossil fuels. The production and storage of hydrogen have become essential technologies recently. Electrolysis of water using electricity or sunlight is the method that is being used for the environmentally benign production of hydrogen. However, hydrogen production through electrolysis is hindered by the slow oxygen evolution reaction
What is The Application of Dimensionally Stable Anode (DSA) in Wastewater Treatment?
What is The Application of Dimensionally Stable Anode (DSA) in Wastewater Treatment? Coated titanium electrode is also named DSA (dimensionally stable anode). This electrode is the main form of metallic oxide. The distance between anode and cathode will not change, so its electrode wear is small and the size is stable. This dimensionally stable anode has been widely used in the electrolysis industry because of its property, which brings lots of advantages. DSA is a type of electro-catalytic electrode, which
Recommend Read
-
Japan Clients Visited UTron Factory
0n 20th November, Japan Clients visit UTron Technology Co.,Ltd factory for technical communication of ICCP titanium anodes of MMO tubular anode, MMO ribbon anode etc., they discussed the working environmen
-
Middle East Client Visited UTron Factory
The Middle East clients who have cooperated with UTron Technology Co.,Ltd for more than ten years visited UTron factory on 15th October. They highly praised the excellent quality of ICCP titanium anodes an
-
UTron Celebrated The 10th Anniversary
UTron Technology Co.,Ltd (previously named Elade) was founded on 8th September in Xi’an, China. It is one of the leading manufacturers of titanium electrode and titanium electrolyzer in China. It has expert technic
-
UTron Attended The CORROSION 2016 in Canada
CORROSION 2016 was held on 6-10 March 2016 in Vancouver, British Columbia, Canada. UTron Technology Co., Ltd( previously named Elade) attended this exhibition, they showed their latest technology of ICCP titanium anode,
-
UTron Visited The 4th China International Drinking Water Exhibition
The 4th China (Guangzhou) International High-end Drinking Water and Water Equipment Exhibition were held in 9th -11th September in Guangzhou China. It is mainly for hydrogen ionizer cup, hydrogen water generator, hydroge