Ir-Ta Oxide Coating Titanium Anode Rods for Electrowinning with EMEW technology

Ir-Ta Oxide Coating Titanium Anode Rods for Electrowinning with EMEW technology 

EMEW Electrowinning technology significantly enhanced performance of flows and effluent conditions,the electrolyte is circulated rapidly past the anode and cathode at a higher flow rate, allowing for improvements in efficiency and precious metal recovery. A rod anode constructed of titanium with mixed metal oxide coating usually applied for EMEW cell. UTron had offered Ir-Ta oxide coating titanium anode rods for electrowinning with EMEW technology to their Russia customer.Below is some parameter for reference:

Material: Titanium Grade 1;
Coating: Iridium tantalum oxide;
Current Density: 150A/m2;
Dimension: As per the drawing per attachment;
PH: 2-4;
Temperature: 40-50˚ C;
Exported Country: Russia.

UTron have dedicated in titanium anodes developing and manufacturing over 14 years. With expert engineers and rich technical experience, UTron can customize the titanium anode service life, current output, MMO coating, dimension etc, recoating service is also available. Any queries, please don’t hesitate to contact us.
 

Recommend Products