MMO Ribbon Anode and Titanium Conductor Bar
The MMO Ribbon Anode consists of mixed precious metal oxides that are sintered to the surface of titanium substrate to have electro catalytic characteristics. This mixed metal oxide anodes have an extremely low consumption rate, the titanium substrate remains constant throughout the design life of the anode. It can be used in fresh water, brackish water, seawater, coke, or sand environment in cathodic protection application with long operating life.
UTron manufactures MMO ribbon anodes by using pure titanium substrate, which meets ASTM B265 in Grade 1 or Grade 2 standards, coated with precious mixed metal oxides IrO2/Ta2O5 for a maximum current density of 17 mA/m. They can be used in sands with various levels of moisture and salt contents, and can be designed to provide effective protection for 50 years and more. Strict quality procedures are followed throughout the coating process to ensure proper adhesion and loading. The coating is strictly following Tape test as per ASTM D 3359 -97 and NACE 0294 - 2007 9 months test - cell voltage and single electrode potential S.E.P..The MMO ribbon anode is proven to perform high quality.
MMO ribbon anode
Width(mm) | Thickness(mm) | Length(m) |
Current output(mA/m) |
Expected life(a) |
6.35 | 0.635 | 152/155 | 17 | 50 |
6.35 | 0.635 | 152/155 | 42 | 50 |
12.7 | 0.635 | 152/155 | 84 | 50 |
Titanium conductor bar:
Width | 12.7mm | 6.35mm |
Thickness | 0.9mm | 0.6mm |
Std coil length | 152.4meters | 76m |
Std coil weight | 3.8kgs | 3.9kg |
Substrate | ASTM B265 Grade 1 | ASTM B265 Grade 1 |
Design life | 50 Years | 50 Years |
Titanium conductor bar is joined to MMO ribbon anode by spot welding to form a grid pattern under the tank which provides even distribution of current. They are applied in cathodic protection of above ground storage tank bottoms and in concrete structures.
Features:
Conveniently cut and welded in the field to suit various geometries;
Easy installation - eliminates the need for expensive and time consuming saw cuts and grouting;
Surface mounted - provides even current distribution, reduced potential for shorts to rebar;.
Low system electrical resistance;
Durable - extremely long expected service life (75 yr);
Lightweight – 100 feet of the (6.35mm) ribbon weighs slightly more than 1lb;
Dimensional stability eliminates issues associated with connection seals;
Economical - efficient installation reduces total installed cost.
Applications:
Bridge substructures
Buried steel structures;
Reinforced concrete structures;
Underground and above ground storage tanks.
Working Environment: evolution O2, Cl2; or soil, fresh water, brackish water, and seawater.
Projects for Reference:
MMO Ribbon Anode 6.35x0.635mm for UAE CP Project
MMO Ribbon Anode 110 mA/m2 for Saudi Arabia Project
MMO Ribbon Anode 17 mA/m2 Oman ICCP Project
MMO Ribbon Anode 42 mA/m2 USA CP Project
ICCP CP System Used MMO Ribbon Anode and Titanium Conductor Bar
Reinforced Concrete Structures Used MMO Ribbon Anode
Recommend Products
-
MMO Ribbon Anode and Titanium Conductor Bar
MMO Ribbon Anode and Titanium Conductor Bar The MMO Ribbon Anode consists of mixed precious metal oxides that are sintered to the surface of titanium substrate to have electro catalytic charac
-
MMO Ti Linear Anode
MMO Ti Linear Anode MMO linear anodes are a flexible, prepackaged porous, woven acid-resistant sleeve linear anode contains high conductivity calcined petroleum coke breeze. This sleeve is sewn using a
-
MMO Ti Tubular Anode
MMO Ti Tubular Anode MMO Tubular Anode provides longest life and greatest current output in all ICCP anodes for the sake of its largest surface area and the compact cable connection. It has been proven to op
-
MMO Tubular Anode
MMO Tubular Anode MMO Tubular anode is easy to install since no breakage or damage while installation, it is of high current capacity per anode. MMO tubular anode can use for the soil, fresh w
-
Powered Titanium Water Heater Anode Rod
Powered Titanium Water Heater Anode Rod Powered anode is an impressed-current anode which is not consumed. A powered anode rod in water heater does not react with the wate
-
Coated Titanium Electrodes for Brine Water Electro-Chlorination
Coated Titanium Electrodes for Brine Water Electro-Chlorination For seawater electro-chlorination systems, the Electrolyzer generally divided into concentric Tubular Electrolyzers (CTE) and Parallel Plate Electrolyzer
-
Platinum Coated Titanium Electrode Plate for Water Ionizer
Platinum Coated Titanium Electrode Plate for Water Ionizer The crucial component of a water ionizer is its plates or “electrodes”. Electrodes are immersed in the water and send positive DC voltage into one
-
Platinum Coated Titanium Electrodes
Platinum Coated Titanium Electrodes A platinized titanium anode is a layer of platinum or platinum metal oxides coated on titanium substrate. It is lasting, non-consumable and insoluble in the elec
-
Ruthenium Oxide Coated Titanium Blades for Pool Salt Cell
Ruthenium Oxide Coated Titanium Blades for Pool Salt Cell The salt cell in a salt chlorinator is the part that actually converts Salt (NaCl) to Chlorine, which consists of a plastic housing and the electrodes. Th
-
Platinum Plated Solid Titanium Plate for Water Ionizer Electrolysis Chamber
Platinum Plated Solid Titanium Plate for Water Ionizer Electrolysis Chamber The electrode plate is a crucial component in the electrolysis chamber for a water ionizer. The material