Information Center

What is Electrochemical Water Disinfection? Electrochemical water disinfection can be defined as the elimination of microorganisms from a water sample using the passage of electrical current through that sample. Here the electrode materials are very important because upon application of the electrical current electrochemical reactions occur at the surface of the electrodes. At the cathode, hydrogen gas is produced, and at the anode, oxygen gas is produced along with oxidizing compounds that can include ozone, free chlorine, peroxid

Titanium Anode Basket for Nickel Copper Zinc Plating Titanium anode basket is significantly applied in nickel, copper, and zinc plating. The anode baskets are mainly cubic containers whose forward and rear walls consist of 0. 8-1. 0 mm thick expanded metal of various mesh sizes. The cross-section of the basket hooks must be so dimensioned that the current density does not exceed 1 amp. /mm2. In general, the basket hooks are manufactured of bars in square or flat cross-sections. They shall rest with one edge on the anode bus with po

Titanium Coils for Chromium Plating Baths Chromium-plating baths mainly consist of aqueous solutions of chromic acid with minor additions, e. g. of sulphuric acid, chromic sulphate, chromic chromate, or fluorsilicic acid. They are regarded as strong oxidation agents. The operating temperature is between room temperature and about 65°C. Chromium-plating equipment often consists of steel trays lined with wire-reinforced glass plates or with antimonious lead. In some cases, it is possible to use brick-lined trays. Due to the hi

Platinum Plated Titanium Anodes for Electroplating in Acidic Copper Sulphate Solution For a couple of years, gold-plating baths have been equipped with undissolvable anodes. Significant reasons for using undissolvable anodes are to avoid pollutions of the gold-plating bath by other metals from the gold anodes and to keep the current output at the anode and cathode possibly on the same level. Depending on the type of gold-plating bath you can use undissolvable anodes of stainless steel, graphite, nickel/ chromium alloys, or platinum