Information Center

The Reason for Titanium Surface Oxide Film Generation The underlying reason for the very existence of metallic titanium in most common environments is that it rapidly and spontaneously forms an oxide film with exceptional stability and properties that allow it to effectively isolate the metal from the environment. Hence, titanium's corrosion resistance and ability to resist hydrogen absorption are dependent on the properties of this protective film. The composition of thin titanium oxide films on titanium in an aqueous solu

What will Titanium Metal Behavior in Aqueous Solutions? The electrochemical response of titanium metal behavior in aqueous solutions falls somewhere between that of the true valve metals (e.g., Zr, Nb, Ta) and that of the active-passive metals (e.g., Fe, Co. Ni, Cr). In particular, its oxide film formation resembles that of valve metals, while its corrosion is similar to corrosion of active-passive metals. In defining the bounds of his review of the electrochemical behavior of titanium. In aqueous solutions, titanium displays four

What are the Properties of Titanium Metal? Titanium is an important structural material due to its combination of low density, high strength, and ability to withstand extremes temperatures. It can be as strong as steel but 45% lighter, or twice as magnesium as aluminum while only 60% heavier. These features have led to its widespread application in the aerospace industry. Titanium is an extremely reactive element. It burns in air and is the only element to burn in nitrogen. Bare metallic Titaniumreact strongly with water and hyd

How insoluble titanium anodes used in nickel plating baths? During nickel plating, the anode provides electrical contact with the solution and distributes the current to the work being plated. In most cases, the plate uses nickel metal anodes which dissolve as the current flows and thereby replace the nickel ions discharged at the cathode, maintaining the concentration of nickel salts dissolved in the plating solution. Small insoluble anodes made by titanium with a thin coating of platinum have been used to increase the current