Information Center

How is the MMO Anode Installed in Cathodic Protection? Before anode installation, the surface should be well prepared. The concrete surfaces intended to receive installation of anode material, e.g. conductive coatings or activated titanium mesh within a cementitious overlay, shall be prepared so as to present, as a minimum, a clean, non‑friable surface and in order that the substrate to overlay adhesion. Cathodic protection conductive coatings generally require a minimum of preparation to leave a maximum of cement paste and mini

What Should You Be Aware of Before Choosing a Proper Portable Reference Electrode? In order to determine the performance of the cathodic protection, a monitoring system shall be incorporated. The monitoring system shall incorporate sensors at representative points over the entire structure/anode zone to be protected. The cathodic protection system performance shall be determined by measuring the steel/concrete potential, using reference electrodes. Below factors should be noted for an appropriate monitoring system 1. Suitable r

How Does Activated Titanium Anodes Install in a Cathodic Protection System? On surface installation of a cathodic protection system, the activated titanium shall take the form of a mesh or grid, distributed in accordance with the cathodic protection system design, on the concrete surface. Titanium connectors shall be spot welded to the mesh or grid to distribute current to all component parts of the anode and to facilitate electrical connections to the anode. Where anode/cable connections are to be incorporated into the cementitiou

Activated Titanium Anode Systems and Organic Coatings in Cathodic Protection The cathodic protection system shall include an anode system intended to distribute the cathodic protection current to the surfaces of the embedded steel to be protected. Impressed current cathodic protection systems shall further incorporate positive and negative direct current cables between the anode and the steel, respectively, and the DC power supply, which is the source of the cathodic protection current. Organic Coatings in Cathodic Protection T