MMO Ribbon Anode  in Grid Configuration for Tank Bottoms Cathodic Protection

MMO Ribbon Anode in Grid Configuration for Tank Bottoms Cathodic Protection

MMO Coated Ribbon Anode in Grid Configuration for Tank Bottoms Cathodic Protection An impressed current cathodic protection (ICCP) is employed for tank bottoms corrosion since it  allow low profile used between the tank bottom and any secondary containment liner or existing tank bottom in the case of a double bottom tank. The field-erected anode grid configuration is one of primary cathodic protection configurations  of MMO anodes for tank bottoms. It adopts MMO ribbon anodes field cut into strips and laid out

Coke Breezes Used in Impressed Current Cathodic Protection System

Coke Breezes Used in Impressed Current Cathodic Protection System

Coke Breezes Used in Impressed Current Cathodic Protection System Coke breeze is the typical backfill material used in impressed current CP systems. It is employed to lower anode resistance and increase anode life. Metallurgical coke and petroleum coke are two common types. Metallurgical coke is derived from heating coal (coking) during the steel making process, which is usually adequate for most surface bed applications but generally requires tamping. Petroleum coke is derived in the refining process then calcined whose qual

What Do You Need to Know before an Impressed Current Cathodic Protection Installation?

What Do You Need to Know before an Impressed Current Cathodic Protection Installation?

What Do You Need to Know before an ICCP system Installation? Impressed current cathodic protection is applied by coupling the metal to be protected to the negative pole of a direct current source , while the positive pole is coupled to an auxiliary anode. Impressed current anodes should be inspected for compliance with specifications for anode material, size, and length of lead wire and to confirm that the anode cap (if specified) is secure. Lead wires should be carefully inspected to detect possible insulation defects.

What Reference Electrodes are Mostly Used in Cathodic Protection System?

What Reference Electrodes are Mostly Used in Cathodic Protection System?

What Reference Electrodes are Mostly Used in Cathodic Protection System? Reference electrodes are used to measure the polarization potential of cathodic protected structures. They shall be kept in contact with the same electrolyte (soil or water) surrounding the structures, and the voltage that rises between the structure and the lead cable of the electrode, measured with a high-impedance voltmeter, gives an indication of the effectiveness of Cathodic Protection. Depending on the electrolyte where the reference electrode will be u


Recommend Read